目 次
研究论文
绿竹甲酸预处理脱木素的响应面法优化
……………唐兴平 刘 婧 罗小林 等(1)
合成聚合物改性TiO2及对加填纸主要性能的影响
……………………陈夫山 宋鹏瑶 宋晓明(7)
不同制备方式得到的MFC的增强应用对比
……………胡 云 刘金刚 许泽红 等(13)
Fe3+对好氧活性污泥理化特性的影响
……………兰善红 李慧洁 王传路 等(18)
近红外光谱结合Lasso算法测定制浆材抽出物含量
……………吴 珽 房桂干 梁 龙 等(22)
基于位平面的纸病检测算法研究
……………亢 洁 潘思璐(27)
细菌纤维素纸质复合微滤膜的开发
……………宋 冰 石 勇 陆海龙 等(32)
基于专家经验的单神经元串级温差控制研究
………………………………黄亚南 张爱娟 胡慕伊(38)
基于工艺流程的纸机干燥部建模与模拟
……………孔令波 刘焕彬 李继庚 等(44)
综 述
现代纸机压榨毛毯及毛毯纸幅体系的技术研究进展
……………朱 文 张 辉(51)
近红外光谱分析技术在制浆过程中的应用
……………梁 龙 施英乔 崔宏辉 等(61)
总目次
《中国造纸学报》2015年总目次……………(66)
·Peer Reviewed Papers·
Optimizing Lignin Removal of Green Bamboo during Formic Acid Pretreatment by Response
Surface Methodology
……………TANG Xingping LIU Jing LUO Xiaolin et al (1)
The Impact of Synthetic Polymer Modified TiO2 as Filler on Paper Properties
………………………CHEN Fushan SONG Pengyao SONG Xiaoming (7)
Influence of Different Preparation Methods of MFC on Its Strengthening Performance in Paper
………………………………HU Yun LIU Jingang XU Zehong et al (13)
Effect of Fe3+ on Physicochemical Properties of Aerobic Activated Sludge during Domestication
by Pulping Middlestage Effluent
……………LAN Shanhong LI HuiJie WANG Chuanlu et al (18)
The Prediction of Pulpwood Extractives Content by Near Infrared Spectroscopy Combining with
Lasso Algorithm
……………WU Ting FANG Guigan LIANG Long et al (22)
Study on Detection Algorithm of Paper Defects Based on Bitplane
……………KANG Jie PAN Silu (27)
Preparation and Characteristics of a Paperbased Bacterial Cellulose Microfiltration Membrane
………………………………SONG Bing SHI Yong LU Hailong et al (32)
Single Neuron Cascade PID Control Based on Expert Experiences for Temperature Difference
Control System of a Digester
……………HUANG Yanan ZHANG Aijuan HU Muyi (38)
Modeling and Simulation of Paper Machine Dryer Section Based on Its Process Flow
…………………………KONG Lingbo LIU Huanbin LI Jigeng et al (44)
·Reviews·
Research Progress on the Press Felt and Feltsheet System in the Modern Paper Machine
…………………………………ZHU Wen ZHANG Hui (51)
Application of Nearinfrared Spectroscopy in Pulp and Paper Industry
………………………LIANG Long SHI Yingqiao CUI Honghui et al (61) | 
