|
|
 |
| 首页 >> 中国造纸杂志社 >> 中国造纸 >> 目录 >> 《中国造纸》2021年第07期中英文目次 |
高得率浆·原料
-
- 限塑和禁止固废进口政策下中国造纸工业纤维原料的供应策略
- 房桂干，沈葵忠，李晓亮，史君齐
- 2021 ,(7):1-7[摘要](69)[PDF](44)[HTML](52)
高得率浆·工艺
-
- MgO作为P-RC APMP高浓停留段部分碱源并替代漂白助剂的研究
- 张博，刘鑫，吴开丽，王晓迪，张方东，刘苇，侯庆喜
- 2021 ,(7):8-14[摘要](61)[PDF](53)[HTML](25)
-
- 纳米TiO2复合荧光增白剂的制备及其在纸张中的应用
- 张光华，王哲，郭明媛，倪美乐，韩小倩，童欣，王艳蒙，冯鹏超
- 2021 ,(7):15-23[摘要](61)[PDF](35)[HTML](32)
高得率浆·应用
-
- 高得率浆的发展现状及高值化应用研究进展
- 张雪，张红杰，程芸，刘晓菲，李丽姿，刘成跃
- 2021 ,(7):24-32[摘要](68)[PDF](50)[HTML](28)
高得率浆·环保
-
- 化学机械浆废水处理技术现状与发展
- 冉淼，丁来保，房桂干，施英乔，盘爱享，田庆文，吴珽
- 2021 ,(7):33-39[摘要](64)[PDF](41)[HTML](28)
-
- 毛竹化学机械浆浓废液碱回收性能及混合废液处理技术的研究
- 张羽，苏振华，范述捷，龚琛，倪建萍，杨彬
- 2021 ,(7):40-46[摘要](70)[PDF](36)[HTML](27)
-
- 化学机械浆碱回收苛化绿泥的压榨处理
- 何贯洲
- 2021 ,(7):47-50[摘要](58)[PDF](42)[HTML](26)
高得率浆·工程设计
-
- BCTMP生产线的技术改造
- 焦健，刘燕韶，李刚，盘爱享，邓拥军，张凤山，房桂干
- 2021 ,(7):51-55[摘要](62)[PDF](40)[HTML](25)
-
- 化学机械浆工程设计实践
- 金猛，夏庆根，张成峰，张诚
- 2021 ,(7):56-61[摘要](71)[PDF](99)[HTML](25)
研究论文
-
- 羧乙基化和碱预处理玉米芯渣制备纳米纤维素的研究
- 陈长明，陈京环，刘金刚
- 2021 ,40(7):62-69[摘要](52)[PDF](96)[HTML](29)
-
- 木质素含量对纤维素纳米纤维热稳定性的影响
- 王绪崇，张胜，袁晓君，陆丽蓉，张日婧，徐子越，孙文，骆莲新
- 2021 ,40(7):70-77[摘要](39)[PDF](28)[HTML](25)
-
- 辊压法烟草薄片增强用醚化改性木质纤维的研究
- 危培，高颂，李冠辉，方志强，刘志昌，舒灏，童宇星，乐喜，王子维，陈一桢，晏群山，彭瑞，万超
- 2021 ,40(7):78-86[摘要](71)[PDF](49)[HTML](41)
-
- ZnCl2预处理改善超疏水滤纸性能的研究
- 曹鑫宇，黄关红，胡志军，张露，曹雨臣
- 2021 ,40(7):87-92[摘要](51)[PDF](70)[HTML](28)
-
- 基于等标污染负荷法的化学法制浆全过程水污染源解析
- 蔡慧，朱文远，王淑梅，王立永，董元锋
- 2021 ,40(7):93-98[摘要](48)[PDF](31)[HTML](29)
技术报告
-
- 永磁耦合器在转鼓碎浆机上的应用
- 黄萌洁
- 2021 ,40(7):99-104[摘要](53)[PDF](35)[HTML](29)
专栏
-
- 日本制浆造纸行业的现状和展望——2020年概况及后疫情下的发展方向
-
- 2021 ,40(7):105-109[摘要](37)[PDF](28)[HTML](35)
高得率浆·原料
-
- Supply Strategy of Fiber Sources for China’s Paper Industry under Policies of Restriction Usage of Plastic and Banning Solid Wastes Importation
- FANG Guigan,SHEN Kuizhong,LI Xiaoliang,SHI Junqi
- 2021 ,(7):1-7[Abstract](69)[PDF](44)
高得率浆·工艺
-
- Application of MgO as Part of Alkali Source and Substitute for Bleaching Additives in P-RC APMP High Concentration Retention Section
- ZHANG Bo,LIU Xin,WU Kaili,WANG Xiaodi,ZHANG Fangdong,LIU Wei,HOU Qingxi
- 2021 ,(7):8-14[Abstract](61)[PDF](54)
-
- Preparation of Nano TiO2 Composite Fluorescent Whitening Emulsion and Its Application in the Paper
- ZHANG Guanghua,WANG Zhe,GUO Mingyuan,NI Meile,HAN Xiaoqian,TONG Xin,WANG Yanmeng,FENG Pengchao
- 2021 ,(7):15-23[Abstract](61)[PDF](35)
高得率浆·应用
-
- Development Status and High-value Application Research Progress of High Yield Pulp
- ZHANG Xue,ZHANG Hongjie,CHENG Yun,LIU Xiaofei,LI Lizi,LIU Chengyue
- 2021 ,(7):24-32[Abstract](68)[PDF](50)
高得率浆·环保
-
- Progress on Treatment Technique of Chemical Mechanical Pulp Wastewater
- RAN Miao,DING Laibao,FANG Guigan,SHI Yingqiao,PAN Aixiang,TIAN Qingwen,WU Ting
- 2021 ,(7):33-39[Abstract](64)[PDF](41)
-
- Study on the Alkali Recovery Performance and Mixed Wastewater Treatment Technology of Effluent from Bamboo Chemical Mechanical Pulping Process
- ZHANG Yu,SU Zhenhua,FAN Shujie,GONG Chen,NI Jianping,YANG Bin
- 2021 ,(7):40-46[Abstract](70)[PDF](36)
-
- Press Treatment of Caustic Green Mud from Alkali Recovery of Chemical Mechanical Pulp
- HE Guanzhou
- 2021 ,(7):47-50[Abstract](58)[PDF](42)
高得率浆·工程设计
-
- A Successful Updating Practice on BCTMP Pulping Production Line
- JIAO Jian,LIU Yanshao,LI Gang,PAN Aixiang,DENG Yongjun,ZHANG Fengshan,FANG Guigan
- 2021 ,(7):51-55[Abstract](62)[PDF](40)
-
- Engineering Design for Chemical Mechanical Pulp
- JIN Meng,XIA Qinggen,ZHANG Chengfeng,ZHANG Cheng
- 2021 ,(7):56-61[Abstract](71)[PDF](99)
Peer Reviewed Paper
-
- Preparation of Nanocellulose from Corncob Residue Using Carboxyethylation and Alkali Pretreatment
- CHEN Changming,CHEN Jinghuan,LIU Jingang
- 2021 ,40(7):62-69[Abstract](52)[PDF](96)
-
- Effect of Lignin Content on the Thermal Stability of Cellulose Nanofiber
- WANG Xuchong,ZHANG Sheng,YUAN Xiaojun,LU Lirong,ZHANG Rijing,XU Ziyue,SUN Wen,LUO Lianxin
- 2021 ,40(7):70-77[Abstract](40)[PDF](28)
-
- Carboxymethylated Wood Fibers for Rolled Reconstituted Tobacco Sheet as a Reinforcing Phase
- WEI Pei,GAO Song,LI Guanhui,FANG Zhiqiang,LIU Zhichang,SHU Hao,TONG Yuxing,LE Xi,WANG Ziwei,CHEN Yizhen,YAN Qunshan,PENG Rui,WAN Chao
- 2021 ,40(7):78-86[Abstract](71)[PDF](49)
-
- Study on Improving the Performance of Superhydrophobic Filter Paper by ZnCl2 Pretreatment
- CAO Xinyu,HUANG Guanhong,HU Zhijun,ZHANG Lu,CAO Yuchen
- 2021 ,40(7):87-92[Abstract](51)[PDF](71)
-
- Application of Equal-standard Pollution Load Method in the Analysis of Wastewater Pollution Sources in the Whole Process of Chemical Pulping
- CAI Hui,ZHU Wenyuan,WANG Shumei,WANG Liyong,DONG Yuanfeng
- 2021 ,40(7):93-98[Abstract](48)[PDF](31)
Articles
-
- Application of Magnetic Coupling in Drum Pulper
- HUANG Mengjie
- 2021 ,40(7):99-104[Abstract](53)[PDF](35)
Column
-
- Current Status and Prospects of the Japanese Paper Industry ——Overview of 2020 and Future Development Direction after COVID-19
- 2021 ,40(7):105-109[Abstract](37)[PDF](28)
|
|
|
